Overview

Dulux Quick Dry Satinwood is an easy to use, non-drip paint with a mid sheen, perfect if you’re looking for something more subtle than a high gloss finish. It touch dries in an hour and is ready to recoat after 6 hours. No need for an undercoat, it’s self-undercoating. The finish is wipeable and suitable for use on interior wood and metal.

No need for an undercoat
Touch dries in 1 hour
Non-drip
Lasting protection
Low VOC

Area	Interior
Recommended Use	Interior wood and metal
Base	Water Based
Coverage	Up to 16m² per litre
Drying Time	Touch Dry - 1 Hour, Dry - 6 Hours
Re-Coat Time	6 Hours Minimum
Recommended Coats	2 Coats
Application Method	Brush, Roller
VOC Levels	Low
Clean Up	Remove excess paint from the brush or roller and clean with water.

Preparation

Make sure that the area you are painting is clean, dry and free from grease.

If you are painting radiators, make sure that they are not warm.
Thoroughly rub down previously painted surfaces, ensure to remove any loose or flaking paint.
Remove or seal any previous oil/ solvent based finishes, a product such as would ensure adhesion and seal any knots.
Treat knots with an appropriate knotting solution.

Application

Firstly, stir thoroughly to ensure that the paint is mixed completely and test a small area to be sure you’re happy with the finish.

Apply two even coats with a roller or brush.
Leave at least 6 hours before applying the second coat.
If it's cold and damp, leave longer than 6 hours between coats.
Use a synthetic brush for best results.
Newly painted doors and windows should not be closed and radiators should not be heated until the paint is completely dry.